- ATTACH
ATT DW780 HUB DWn 3 4 ! attaches the DW780
or
ATT DW750 HUB DWn ! attaches the DW750
or
ATT DW730 HUB DWn ! attaches the DW730
ATT RL11 DW0 DLa 774400 160 5 ! attaches the RL11 controller
ATT RL02 DLa DLan ! attaches the RL02
- DEVICES
EVRFA supports the RL02 Disk Drives.
- RL02
Device: RL02
Link: DLa
Generic name: DLan
- RL11
Device: RL11
Link: DWn
Generic name: DLa
Additional information:
UNIBUS address (CSR): [octal 760000-777774] <774400>
UNIBUS vector: [octal 4-774] <160>
UNIBUS BR level: [decimal 4-7] <5>
- EXECUTION_TIME
Run time for the default tests is approximately 4 minutes.
- SECTION
Defines the diagnostic program sections (/SECTION qualifier on RUN or
START) which this program supports.
- DEFAULT
Evoked by typing: ST <return>
RUN EVRFA <return>
Runs all default tests (tests 1 - 32)
- TIMING
Evoked by typing: ST/SEC:TIMING <return>
RUN EVRFA/SEC:TIMING <return>
Runs seek timing and rotational speed tests only (tests 17,31).
These tests are also included in the default section.
Timing tests are not run on a VAX 11/730 CPU since overhead makes
timers inaccurate.
- MANUAL
Evoked by typing: ST/SEC:MANUAL <return>
RUN EVRFA/SEC:MANUAL <return>
Runs only the manual intervention tests (tests 32-39).
These tests require operator intervention.
- OVERWRITE
Evoked by typing: ST/SEC:OVERWRITE <return>
RUN EVRFA/SEC:OVERWRITE <return>
Runs overwrite test (test 40).
- ALL
Evoked by typing: ST/SEC:ALL <return>
RUN EVRFA/SEC:ALL <return>
Runs all tests in all sections of this diagnostic.
- HELP
EVRFA version 3.1 is a Level 3 Functional diagnostic for the
RL02 DISK SUBSYSTEM. Of the 40 tests, Test 1 through Test 32
can be run by DEFAULT. See HELP SECTION for more information
on running the non-default tests.
- SELECT
SEL DLa ! selects the controller to test
SEL DLan ! selects the drive to test