- ATTACH
(Unibus Devices)
ATT DW780 HUB DW0 3 4 ! attaches the DW780
or
ATT DW750 HUB DW0 ! attaches the DW750
or
ATT DW730 HUB DW0 ! attaches the DW730
or
ATT DWBUA HUB DW0 n 4 ! attaches the DWBUA
! where n = BUA node ID (0-15)
ATT TU80 DW0 MSA0 772520 224 5 ! attaches the TU80 drives
- DEVICES
M7454 controller with a TU80 tape drive (up to 4 controllers total)
- TU80
Device: TU80
Link: DW0
Generic name: MSA0
Additional information for TU80
UNIBUS CSR : [octal 760000-777774] <772520>
UNIBUS VECTOR: [octal 4-774] <224>
UNIBUS BR: [decimal 4-7] <5>
- SECTION
Defines the diagnostic program sections (/SECTION qualifier on RUN or
START) which program supports.
MANUAL - Runs manual test menu for operator use
CONFIGURATION - Displays selected drive status for operator.
SCOPE - Selected, via menu, tight scope loops for operator.
- DEFAULT
Evoked by DS> ST
DS> RUN EVMBD
Runs default tests (Tests 1-13)
- HELP
EVMBD is a Level 3 magtape functional diagnostic. This program requires
that the TU80 be connected to the M7454 controller and that the drive
be in an on-line state.
- SELECT
SEL MSA0 ! select TU80 drives
- EVENT_FLAGS
No EVENT FLAGS are used by this diagnostic