- ATTACH
The TS11 must be attached using the following ATTACH sequence:
Attach the appropiate adapter
DS> ATTACH DW730 HUB DW0 5
or
DS> ATTACH DW750 HUB DW0 5
or
DS> ATTACH DW780 HUB DW0 3 4
Attach the device to test
DS> ATTACH TS11 DW0 MSAx 772520 224 5
DS> SELECT MSAx
where x is an arbitrary unit number.
- HELP
This diagnostic checks the functionality of from 1 to 16 TS11 magnetic
tape subsystems attached to any VAX-11 processor. Multiple units are
tested serially. This is a Level 3 diagnostic, which must run under the
VAX Diagnostic Supervisor, in a stand-alone environment.
- SECTIONS
There are a total of 40 tests in the diagnostic. The first 36 are run
by default, and 37-40 are run by specifying the Manual qualifier.
- DEFAULT
The default section contains 36 tests. Run time is approximately 6 mins.
Consult the Documentation for a more detailed account of any of these
36 tests.
- MANUAL
Tests 37-40 are manual intervention tests. These tests are the On-line/
Off-line Test, the Write Protection Test, the Drive Power-fail Test, and
the Rewind and Unload Test. Consult the Documentation for a detailed
account of what is required from the operator.
- EVENT_FLAGS
Not Implemented
- QUICK_FLAG
Not Implemented
- SUMMARY_REPORTS
Not Implemented