- ATTACH
The CPU must be attached. A VAX-11/730 CPU is a KA730, etc.
- KA730
DS> ATT KA730 HUB KAn (1) (2) (3) (4) (5) (6)
(1) Time-of-year clock (YES or NO)
(2) WCS last address
(3) Accelerator type (0 = FPA absent, 1 = FPA present)
(4) K-bytes of Main Memory
(5) User WCS loaded (YES or NO)
(6) SB errors (YES or NO)
- KA750
DS> ATT KA750 CMI KAn (1) (2) (3) (4) (5)
(1) G-Floating Instructions (YES or NO)
(2) H-Floating Instructions (YES or NO)
(3) Time-of-year clock (YES or NO)
(4) WCS Last Address, Hex
(5) Accelerator Type (0 = FPA absent, 1 = FPA present)
- KA780
DS> ATTACH KA780 SBI KAn (1) (2) (3) (4)
(1) G-Floating Instructions (YES or NO)
(2) H-Floating Instructions (YES or NO)
(3) WCS Last Address, Hex
(4) Accelerator Type (0 = FPA absent, 1 = FPA present)
- HELP
This program exercises all of the VAX compatibility mode
instruction set.
- SECTION
- EXCEPTIONS
Tests the various compatibility mode exceptions by verifying
the mechanisms used by the VAX architecture to change to and
from PDP-11 compatibility mode.
- INSTRUCTIONS
Tests compatibility mode Single, Double, and Program Control
instructions.
- EVENT
Event flags 1 and 2 are active with this program.
- FLAG1
Event Flag 1 (set) - Accelerator testing (standalone only) is
inhibited. Event Flag 1 (clear) - Accelerator testing provided
: if Accelerator is present, the entire EVKAD test sequences
are run twice for each test pass, once with Accelerator
disabled, and once with Accelerator enabled.
- FLAG2
Disables the Floating Point Accelerator enable/disable
messages.
- QUICK
The QUICK flag has no effect on this program.
- SUMMARY
This program does not provide a summary report.