- HELP
EVDEG is the sixth of six level 3 diagnostics designed to perform static and
functional testing of the DV11 Communications Multiplexer. EVDEG exercises
only the ASYNCHRONOUS LINE CARDS (M7833). PLEASE NOTE: If Parity is enabled,
make sure that the sync characters selected have the correct parity!
- ATTACH
DS> ATT DW780 SBI DW0 3 4 ; attaches UBA TO 11/780
OR
DS> ATT DW750 CMI DW0 ; attaches UBA to 11/750
The following is an example of attaching a DV11:
DS> LOAD EVDEG ; LOAD DIAGNOSTIC
DS> ATT DV11 DW0 DVA0 0 775000 470 5 ; Attach DV11 to UBA w/logname DVA(n),
; unit #(0-7),address,vector,priority.
DS> ATT M7833 ; Attach M7833 Line Card:
DEVICE LINK? DVA0 ; DV11 Logical name of DVA(n)
DEVICE NAME? LC0 ; Logical name of line card (LC0-LC3)
LINE_CARD? 0 ; Physical line # (0-3)
LINE0? YES ; Active lines (YES,NO) : actual line
LINE1? YES ; selection not supported by EVDEG
LINE2? YES ;* REPEAT "ATT M7833" FOR EACH
LINE3? YES ;* ADDITIONAL ASYNCHRONOUS LINE CARD
;
DS> SELECT ALL ; or SEL (particular device)
DS> START ; Start diagnostic.
- SECTIONS
No special SECTIONS supported in EVDEG.
- DEVICE
Devices supported by EVDEG are:
DV11 Communications Multiplexer
M7833 Asynchronous Line Card
- DV11
Device: Communications Multiplexer
link: DW0
recommended generic: DVA0 (for 1st DV11)
Additional information:
CSR address: 775000 (for 1st DV11)
Vector Address: 300 (for 1st DV11)
Priority: 5
- M7833
Device: Asynchronous Line Card
link: DVA0 (DV11 logical name)
recommended generic: LC0 to LC3
Additional information: Four lines/card, four cards max/DV11
- EVENT
This program does not use event flags.
- QUICK
This program does not implement the QUICK feature.
- SUMMARY
The Summary command is not supported in this program.