- HELP
EVDEF is the fifth of six level 3 diagnostics designed to perform static
and functional testing of the DV11 Communications Multiplexer. This program
tests the DV11 with the aid of loopback cables, and is divided into SECTIONS
based on the need for these cables. The first 16 tests will run with no
loopback and are the "default" tests (always run). Another subset of tests
depend on the H861 Loopback Connector. The last subset of tests depend on
having the H325 Loopback Connector in place. See "SECTIONS" and "EVENT"
for details.
- ATTACH
DS> ATT DW780 SBI DW0 3 4 ; attaches UBA TO 11/780
OR
DS> ATT DW750 CMI DW0 ; attaches UBA to 11/750
The following is an example of attaching a DV11:
DS> LOAD EVDEF ; LOAD DIAGNOSTIC
DS> ATT DV11 DW0 DVA0 0 775000 470 5; Attach DV11 to UBA w/logname DVA(n),
; unit #(0-7),address,vector,priority.
; ATTACH M7839 LINE CARD(S):
DS> ATT M7839 ;(REPEAT FOR EACH SYNCHRONOUS LINE CARD)
DEVICE LINK? DVA0 ; DV11 Logical name of DVA(n)
DEVICE NAME? LC0 ; Logical name of line card (LC0-LC3)
LINE_CARD? 0 ; Physical line # (0-3)
SYNCA? 226 ; Sync Character "A"
SYNCB? 62 ; Sync Character "B"
CHAR_SIZE? 8 ; Number of bits/character (5-8)
PARITY? NO ; Parity (YES,NO)
EVEN? NO ; Even (YES,NO), NO=odd parity
2SYNCS? YES ; Two sync characters (YES,NO),NO=one
LINE0? YES ; Active lines (YES,NO) : actual line
LINE1? YES ; selection not supported by EVDEF.
LINE2? YES ;
LINE3? YES ;
; ATTACH M7833 LINE CARD:
DS> ATT M7833 ;(REPEAT FOR EACH ASYNCHRONOUS LINE CARD)
DEVICE LINK? DVA0 ; DV11 Logical name of DVA(n)
DEVICE NAME? LC1 ; Logical name of line card (LC0-LC3)
LINE_CARD? 1 ; Physical line # (0-3)
LINE0? YES ; Active lines (YES,NO) : actual line
LINE1? YES ; selection not supported by EVDEF
LINE2? YES ;
LINE3? YES ;
;
DS> SELECT ALL ; or SEL <device>
DS> START ; START DIAGNOSTIC.
- SECTIONS
START ; Test Only Internal Logic w/o turnaround
.... OR ....
START/SEC:H325 ; Start diagnostic (Run H325 tests).
.... OR ....
START/SEC:H861 ; Start diagnostic (Run H861 tests).
- DEVICE
Devices supported by EVDEF are:
DV11 Communications Multiplexer
M7839 Synchronous Line Card
M7833 Asynchronous Line Card
- DV11
Device: Communications Multiplexer
link: DW0
recommended generic: DVA0 (for 1st DV11)
Additional information:
CSR address: 775000 (for 1st DV11)
Vector Address: 300 (for 1st DV11)
Priority: 5
- M7839
Device: Synchronous Line Card
link: DVA0 (DV11 logical name)
recommended generic: LC0 to LC3
Additional information: Four lines/card, four cards max/DV11
- M7833
Device: Asynchronous Line Card
link: DVA0 (DV11 logical name)
recommended generic: LC0 to LC3
Additional information: Four lines/card, four cards max/DV11
- EVENT
Event Flags 20-23 are used to select a single line (0-3) of a
particular line card that uses the H325 loopback connector.
- QUICK
This program does not implement the QUICK feature.
- SUMMARY
The Summary command is not supported in this program.