- HELP
EVDBA TESTS THE FUNCTIONALITY OF THE M8202 OR M8201.
- DEVICE
EVDBA supports the m8201 and M8202 modules. These modules cn not be
accessed directly. They must be accessed through a DMC11,KMC11, or
DMP11.
- M8201
Device: DMC11 or KMC11
Link: DW0
recommended generic: XMa
Additional information:
CSR address: 760110 (for first DMC11)
Vector address: 320 (for first DMC11)
BR level: 5
- M8202
Device: DMC11 or KMC11
Link: DW0
recommended generic: XMa
Additional information:
CSR address: 760110 (for first DMC11)
Vector address: 320 (for first DMC11)
BR level: 5
- ATTACH
ATT DW780 SBI DW0 3 4 ; attaches UBA to 11/780
or
ATT DW750 CMI DW0 ; attaches UBA to 11/750
ATT DMC11 DW0 XMa 760110 320 5 ; attaches device to UBA if connected
; to DMC11
ATT KMC11 DW0 XMa 760110 320 5 ; attaches device to UBA if connected
; to KMC11
SELECT XMa ; selects device to be run.
Set Event Flag n ; sets the proper event flag
- SECTIONS
There is only a default section in this diagnostic.
- EVENT-FLAGS
The EVENT FLAGS help describe the internal configuration to the
diagnostic. Set each flag that is applicable to the devices
that are attached for testing.
event flag 1 ........ M8200YA
event flag 2 ........ M8200YB
event flag 3 ........ M8200YC
event flag 4 ........ M8201
event flag 5 ........ M8202
event flag 6 ........ M8203
event flag 7 ........ M8204 1K
event flag 8 ........ M8204 4K
event flag 9 ........ DMP-11
event flag 10 ....... TURNAROUND CONNECTOR
event flag 11 ....... DMC11-FA option installed
- QUICK
The QUICK feature is not implemented in this diagnostic. The diagnostic
execution time is less then one minute for an error free pass.
- SUMMARY
The SUMMARY section is not implemented by this diagnostic.
- REQUIRMENTS
The diagnostics that test the DMC11, KMC11, or DMP11 should run
error-free prior to running this diagnostic.