- HELP
This program exercises the Unibus Adapter (DW780). This is a level
3 program that can only be run under the Diagnostic Supervisor in
standalone mode. THIS DIAGNOSTIC IS *NOT* TO BE RUN WITH MEMORY
MANAGEMENT SET ON BY THE COMMAND 'DS> SET MM ON'. IF THERE IS ANY
DOUBT, TYPE 'DS> SET MM OFF'.
- ATTACH
The DW780 must be ATTached and SELected before running this diagnostic.
- DW780_(780,_785)
DS> ATT DW780 HUB DW0 x y
DS> SEL DW0
Where: 'x' is the TR level, and 'y' is the BR.
- DW780_(8600,_8650)
DS> ATT SBIA HUB SIx
DS> ATT DW780 SIx DW0 'y' 'z'
DS> SEL DW0
Where 'x' is the SBIA the DW is attached, 'y' is the TR level, and 'z'
is the BR.
- SECTIONS
There is only one section in this diagnostic - DEFAULT.
- DEVICE
The diagnostic supports the following device:
DW780
- EVENT
Not Used
- QUICK
Not Used
- SUMMARY
Not Implemented